| MAGNABEND™ 2000E & 2500E High performance electromagnetic sheet metal folder 
| Specifications | | Nominal capacity | Model 2000E: 2000 mm x 1.6 mm (6 ft x 16g) | | | Model 2500E: 2500 mm x 1.6 mm (8 ft x 16g) | Clamping force
(with standard full-length clampbar) | 2000E: 9 Tonne | | 2500E: 12 Tonne | | Eletrical | Supply: | 1 phase, 220/240 V ac | | | Nominal current: | 2000E: 12 Amp | | | | 2500E: 15 Amp | | | Duty cycle: | 30% | | | Protection: | Thermal cut-out, 70°C | | FRONT & SIDE ELEVATIONS , 2000E & 2500E(mm)  
BENDING CAPACITIES (with standard full-length clampbar) | MATERIAL (yield/ult. stress) | THICKNESS | LIP WIDTH (minimum) | BEND RADIUS (typical) | | Mild Steel
(250/320 MPa) | 1.6 mm | 30 mm* | 3.5 mm | | 1.2 mm | 15 mm | 2.2 mm | | 1.0 mm | 10 mm | 1.5 mm | | Aluminium
Grade 5005 H34
(140.160 MPa) | 1.6 mm | 30 mm* | 1.8 mm | | 1.2 mm | 15 mm | 1.2 mm | | 1.0 mm | 10 mm | 1.0 mm | Stainless Steel
Grades 304, 316
(210/600 MPa) | 1.0 mm | 30 mm* | 3.5 mm | | 0.9 mm | 15 mm | 3.0 mm | | 0.8 mm | 10 mm | 1.8 mm | | * With standard bending-beam extension fitted. For most non-ferrous metals (copper, brass, zinc, etc) refer to aluminium above. | | Standard accessories include foot-switch, storage trays, adjustable backstops, and a set of short-length clamp-bars for making boxes. Optional accessories available include a narrow clampbar, a slotted clampbar for forming shallow boxes more conveniently, and a power shear with guide for straight distortion-free cutting of sheetmetal. | 
